*** Money-Back Full Satisfaction Guarantee ***
A NEW ADDITION TO OUR STORES REEL TO REEL REPLACEMENT PART INVENTORY
Super Deluxe
Deck Cleaner and Restore Kit
$69.95
OVER $114.00 VALUE IF PURCHASED SEPARATE FROM OUR WEB PAGE STORE
THIS LARGE KIT INCLUDES:
Rubber Restore Kit:
SELLS FOR $24.95
Pot- VR - Slide - SW - Contact Cleaner Kit:
SELLS FOR $14.95
Pin Point Lube Kit:
SELLS FOR $14.95
High-Temp Synthetic Grease:
SELLS FOR $14.95
Head Cleaner Kit:
SELLS FOR $14.95
Metal and Chrome Bright Kit:
SELLS FOR $14.95
2 SETS, Four Leather Chamois:
SELLS FOR $6.99
Head Clean Ribbon Kit:
SELLS FOR $7.99
2Q-Tip Extender Set
2 Pkg. Double-End Q-Tips
RUBBER RENEW KIT DISCRIPTION:
THIS KIT CAN, AND WILL IN MOST CASES, PAY FOR IT'S SELF WITH JUST ONE USE ON YOUR DECKS MAIN CAPSTAN BELT, PINCH ROLLER OR RUBBER REEL HOLD DOWNS SEPARATELY.
THIS KIT IS A MUST HAVE FOR ALL THE SINGLE VINTAGE REEL TO REEL DECK OWNERS, AND THE MULTI-DECK COLLECTORS, RIGHT DOWN TO ALL YOU GOOD FOLKS OUT THERE SPENDING THE MANY HOURS REPAIRING AND REFURBISHING THESE WONDERFUL WORKS OF ENGINEERING ART FOR RESALE.
THE MOST FANTASTIC THING ABOUT THIS RUBBER REJUVENATION KIT IS SOMETHING MONEY CAN'T BUY, YOUR TIME AND FRUSTRATION!
WE WILL EXPLAIN:
IF YOUR DECK'S MAIN CAPSTAN BELT IS SLIPPING, CAUSING YOUR DECK'S "WOW" TO GO IN AND OUT, WHAT DO YOU DO? YOU MAY FIRST GO ON LINE AND HOPEFULLY EMAIL US FOR A REPLACEMENT BELT FOR YOUR DECK. A BELT REPLACEMENT WILL COST YOU FROM $15.95, ALL THE WAY TO $19.95. WHEN THE BELT COMES IN YOU THEN HAVE TO FIGURE OUT HOW TO REPLACE YOUR BELT. IF YOU HAVEN'T PREFORMED THIS TASK BEFORE ON YOUR OWN DECK, YOU MIGHT NEED TO PURCHASE A SERVICE MANUAL THAT WILL SHOW THE COMPONENTS YOU MUST TEAR DOWN. THERE GOES ANOTHER 15 TO 25 BUCKS, BUT THAT'S NOTHING TO WHATS AHEAD OF YOU NEXT. FOR A FIRST TIMER TO REPLACE A DECK BELT IT IS NO EXAGGERATION TO STATE IT WILL TAKE 2 TO 4 HOURS MINIMUM.
SO LET'S EXPLAIN THE ALTERNATIVE WE ARE OFFERING WITH THIS KIT.
WHAT IF YOU COULD JUST REMOVE YOUR DECKS BACK PANEL AND IN AN EASY TWO PART PROCESS, CLEAN AND REJUVENATE THAT SLIPPING BELT, SNAPPING IT BACK, VERY CLOSE TO NEW.
* * * * *
WITHOUT REMOVING YOUR BELT FROM YOUR DECK!
* * * * * * *
WE OFFER AN ALTERNATIVE THAT WILL TAKE APPROXIMATELY 20 MIN. TO 1 HOUR, WITHOUT EVER HAVING TO REMOVE THE BELT. WE HAVE APPLIED THIS PROCESS TO OVER 50 DIFFERENT DECK MODELS IN OUR STORE, FOR OVER ONE YEAR OF TESTING. IN WELL OVER 90% OF OUR TEST CASES, WHERE THE BELT WAS INTACT AND DRIVING THE CAPSTAN FLYWHEEL FROM SLIPPING TO COMPLETELY NOT TURNING, THIS PROCESS PREFORMED FLAWLESSLY. OUR PROCESS MADE OUR TEST BELTS GRIP AND BECOME SUPPLE AGAIN.
THE PROCESS:
USING THE KIT'S COTTON SWABS, DIP ONE END INTO THE PRE-CLEANER. APPLY CLEANER AND WORK INTO THE EXPOSED PORTION OF THE BELT THAT IS NOT ENGAGED TO THE FLYWHEEL OR OVER THE CAPSTAN MOTOR PULLEY. USE THE DRY END OF THE SWAB TO DRY AND PULL OFF ANY RESIDUAL DEBRIS STILL ON ALL FOUR SIDES OF THE BELT.
ONCE THE CLEANER IS DRY REPEAT THE SAME PROCESS WITH A NEW SWAB AND THE RUBBER RESTORE. USING THE DRY END, SWAB UNTIL YOU NO LONGER SEE ANY RESIDUAL DEBRIS OR BROWN SUBSTANCE COMING OFF THE BELT AND ONTO THE SWAB.
NEXT YOU WILL REPOSITION YOUR BELT, USING THE CAPSTAN SHAFT OR CAPSTAN MOTOR FAN ON THE REAR OF THE MOTOR TO EXPOSE ANOTHER AREA. REPEAT THE ABOVE PROCESS UNTIL THE ENTIRE BELT HAS BEEN CLEANED AND REJUVENATED.
WE HAVE PREFORMED THIS "ON DECK" BELT RESTORE PROCESS ON EVERY BRAND AND MODEL OF DECK THAT HAS COME THRU OUR STORE OVER THE PAST YEAR WITH OUR TECH DEPARTMENT.
WE WERE ABLE TO RESURRECT 90% OF THE INTACT BELTS WE CAME ACROSS IN THESE DECKS.
THE 10% OF BELTS THIS KIT WILL NOT REFURBISH:
THIS KIT WILL NOT REFURBISH BELTS THAT ARE STICKY LIKE TAR TO THE TOUCH OR HAVE CRACKS. PLEASE NOTE THIS WHEN YOU ARE INSPECTING YOU PRESENT DECK'S BELT.
ATTENTION PIONEER RT-909 AND RT-707 DECK OWNERS!
THIS PRODUCT WILL NOT, LET US REPEAT, WILL NOT, RESTORE YOUR DECK'S ORIGINAL FACTORY CAPSTAN PINCH ROLLERS OR ORIGINAL FACTORY MANUFACTURED BELTS THAT CAME WITH YOUR DECK NEW. IF, LIKE IN MOST CASES ON YOUR DECK, THEY ARE BECOMING GUMMY AND STICKY, ONLY NEW REPLACEMENT PARTS WITH CURRENT MANUFACTURED RUBBER COMPOSITIONS WILL SOLVE YOUR PROBLEM. IF YOU ARE CERTAIN YOUR PINCH ROLLERS AND BELT ARE SOMEWHAT CURRENT REPLACEMENTS AND NOT THE ORIGINALS, THEN THIS PRODUCTS WILL PERFORM AS DESCRIBED ON YOUR DECK.
SO THAT COVERS THE BELTS.
LET'S TELL YOU ABOUT ANOTHER EVEN MORE RARE AND EXPENSIVE RUBBER REPLACEMENT PART ON YOUR DECK.
PINCH ROLLERS:
A DAY DOES NOT GO BY AT OUR STORE WHEN WE DO NOT GET 2-3 EMAIL OR PHONE CALL REQUEST FOR REPLACEMENT PINCH ROLLERS THAT WE ARE EITHER SOLD OUT OF OUR STOCK OR ARE SO RARE WE CAN NO LONGER LOCATE THEM TO SELL NEW. IN OUR RESEARCH DURING THESE CORRESPONDENCES WE HAVE DETERMINED THAT AT LEAST 60% OF THESE REQUESTS ARE TO REPLACE A PRESENT PINCH ROLLER THAT OUR KIT COULD MAKE LIKE BRAND NEW WITHOUT REPLACING THE ROLLER.
THE PROCESS TO CLEAN AND REJUVENATE PINCH ROLLERS TAKES JUST 10 MIN. WE PROMISE THAT THIS PROCESS WILL BRING A SMILE TO YOUR FACE IF NOT POP YOUR EYES OUT WHEN YOU SEE AND FEEL THE DIFFERENCE OF YOUR PINCH ROLLER BEFORE THEN AFTER.
JUST ONE COTTON SWAB TIP DIPPED INTO OUR PRE-CLEANER AND APPLY THE CLEANER OVER THE ENTIRE ROLLER, WORK IT IN, THEN DRY. NEXT TAKE ONE SWAB TIP DIPPED INTO OUR RUBBER RESTORE BOTTLE AND WORK IT IN, THEN DRY. FINISH OFF WITH RUBBING THE ROLLERS OUTER CIRCUMFERENCE ON OUR SPECIAL, KIT PROVIDED, CHAMOIS CLOTH AND YOU HAVE A PINCH ROLLER THAT LOOKS AND PERFORMS LIKE BRAND NEW IN 95% OF OUR TEST DECKS.
PLEASE NOTE:
IF YOUR PINCH ROLLER HAS WHAT'S CALLED "CAPSTAN BURN", THAT IS WHERE YOUR PINCH ROLLER HAS ROUNDED DEBITS ACROSS THE OUTER FACE. THIS WAS CAUSED DURING YOUR DECK'S LIFE, WHEN EITHER YOUR TAPE TRANSPORT MECHANISM OR YOUR PINCH ROLLER ITSELF FROZE WHILE YOUR PINCH ROLLER WAS ENGAGED AND YOUR CAPSTAN WAS STILL SPINNING FOR ANY LENGTH OF TIME. THUS YOUR CAPSTAN SHAFT BURNED OR RUBBED A DEBIT INTO YOUR PINCH ROLLER. NEEDLESS TO SAY OUR KIT'S PRODUCTS WILL NOT ALLEVIATE THIS PROBLEM WITH YOUR PINCH ROLLER. IT CAN NOT GROW BACK RUBBER THAT HAS BEEN WORN AWAY.
NEXT LET US TELL YOU ABOUT A DECK COMPONENT THAT IS THE RAREST TO REPLACE WITH A NEW ORIGINAL THAT THIS KIT WILL WORK WONDERS ON.
ORIGINAL RUBBER REEL HOLD DOWNS:
IF YOU HAVE A VINTAGE DECK THAT USES RUBBER REEL HOLD DOWNS THEN YOU KNOW THAT THE 25 YEARS TO 40 YEARS SINCE THEY WERE MANUFACTURED HAS MADE THEM HARD AND IN MOST CASES USELESS TO THERE ORIGINAL PURPOSE. THEY FRUSTRATINGLY FALL RIGHT OFF YOUR DECK'S REEL TABLE SHAFT. THEY HAVE A HARD TIME HOLDING ON THEMSELVES MUCH LESS A SPINNING REEL WITH YOUR DECK IN A VERTICAL POSITION.
THIS WAS THE PART OF OUR DECK TESTS WITH THIS KIT THAT WAS THE MOST EXCITING.
BY NOT ONLY CLEANING AND REJUVENATING THE OUTSIDE OF THESE RUBBER HOLD DOWNS BUT MOST IMPORTANTLY CLEANING AND REJUVENATING THE HOLE IN THE HOLDERS THAT CAPTURES YOUR REEL TABLE SHAFT, THEY GRIPPED LIKE NEW AGAIN IN 80% OF OUR 50 PAIR TEST WITH THIS KIT.
IF THERE ARE NO CRACKS AND THEY ARE JUST STIFF AND OXIDIZED WAIT AND SEE WHAT THIS STUFF WILL DO TO THEM!
THAT COVERS THE 3 MAJOR USUAL REPLACEMENT PARTS THIS KIT REJUVENATION WILL MORE THAN PAY FOR IT'S SELF WITH THE FIRST USE ON YOUR DECK.
NOW EVEN IF THIS KIT WOULD DO JUST THAT ONE DECK IT STILL WOULD BE A BARGAIN PRICE FOR THE LABOR AND FRUSTRATION TIME IT WOULD ELEVATE.
BUT TRY ENOUGH PRE-CLEANER AND RUBBER RESTORE TO DO 100 PLUS DECK'S PINCH ROLLERS, MAIN CAPSTAN BELTS, COUNTER BELTS, REEL HOLD DOWNS IF USED AS WE HAVE DIRECTED AND THAT'S WHAT WE ARE OFFERING WITH THIS KIT.
YOU WILL RECEIVE THIS KIT WITH THE FOLLOWING ITEMS:
ONE 2oz CLASS BOTTLE OF OUR VERY OWN FORMULA OF RUBBER "PRE-CLEANER"
ONE 2oz GLASS BOTTLE OF "M G CHEMICALS" PATENTED "RUBBER RENUE" TO REJUVENATES AND CONDITIONS RUBBER
ONE STARTER PACKAGE OF TWO SIDED STANDARD COTTON SWABS
TWO PIECES OF SUEDE LEATHER CHAMOIS
NOTE FORM OUR STORES OWNER:
PLEASE NOTE THAT INCLUDED IN THIS KIT IS ONE 2oz BOTTLE OF "M G CHEMICALS" PRODUCT NAMED "RUBBER RENUE". YOU OF COURSE ARE ABLE TO PURCHASE THIS PRODUCT ALL ON IT'S OWN AT STORES AND ON THE NET. BUT WE MUST ADVISE THAT WE HAVE USED THIS WONDERFUL PRODUCT IN OUR REPAIR FACILITIES BY IT'S SELF FOR YEARS, AND IT IS ADVERTISED AS BOTH A CLEANER AND RUBBER REJUVENATE, BUT WE FOUND THAT ONLY AFTER WE APPLIED OUR PRE-CLEANER PRIOR TO THE APPLICATION OF RUBBER RENUE TREATMENT DID WE GET THE FANTASTIC RESULTS WE SITED ABOVE IN OUR KIT DESCRIPTION. I JUST WANTED TO EXPLAIN TO ALL YOU GOOD FOLKS IN ADVANCE ANY QUESTION YOU MIGHT HAVE AS TO WHAT'S THE DIFFERENCE BETWEEN OUR KIT BEING OFFERED HERE AND JUST BUYING A BOTTLE OF RUBBER RENUE. OUR "PRE-CLEANER" ALONG WITH OUR TECH DEPARTMENT CONTRIBUTED TRICK OF THE CHAMOIS TO RUB OUT YOUR PINCH ROLLER ON AFTER THE RENUE PROCESS HAS BEEN DESIGNED AS A KIT TO PROVIDE REEL TO REEL DECK OWNERS A PROCESS THAT WE HAVE HAD REQUEST FROM MANY OF OUR CUSTOMERS TO PROVIDE.
Metal and Chrome Bright!
CLEANER KIT
SHAKE WELL BEFORE USING
Clean, Shine and Protect ALL Metal surfaces INSTANTLY. From your decks tape tensioner rollers to your control knobs. Right down to any metallic surfaces that are dirty or tarnished.
NO RUBBING - NO BUFFING
CONTAINS NO ABRASIVES
So it can even be used on your decks recording heads to remove stubborn tape residue or age tarnish.
(please follow up with our head cleaner product to remove all minute remnents from this cleaner)
KIT CONTAINS:
ONE BOTTLE METAL BRIGHT CLEANER 1 oz. net weight
TWO POLISH CHAMOIS
ONE PACK OF Q-Tip APPLICATORS
USE DIRECTIONS:
Simply dip the tip of a Q-Tip into the cleaner and apply to the part to be cleaned. Work the cleaner with back and forth motion and roll the Q-Tip as you work in the cleaner over entire part. Allow cleaner to dry then wipe off cleaner with dry side of Q-Tip or a dry cloth. This cleaner is water washable too. So if the part has been removed from your equipment feel free to rinse cleaner off in sink with warm water. An old tooth brush with a drop of dish soap on it will do wonders to remove cleaner from all small corners and crevices. For final bright luster use the included chamois to bring up a lasting bright shine!
FOR THE PRODUCT DESCRIPTION AND IT'S USES FOR THE OTHER PRODUCTS IN THIS KIT PLEASE SEE OUR WEB PAGE LINKED AT THE TOP OF THIS AUCTION AND GO TO THE "PRODUCTS AND SERVICE" LINK
***FAST PRIORITY MAIL SHIPPING POSTED THE SAME WEEK DAY PAYMENT IS RECEIVED ***
FOR ALL CREDIT CARD PAYMENTS WE ONLY TAKE PAYPAL
ALL INTERNATIONAL PURCHASES MUST BE PAID FOR WITH CREDIT CARD THRU PAYPAL
THANK YOU
| PayPal�eBay's service to make fast, easy, and secure payments for your eBay purchases! |
|
THIS AUCTION IS FOR JUST ONE REEL TO REEL DECK REPLACEMENT PART OF MANY NEWLY ADDED TO OUR EXTENSIVE REPLACEMENT INVENTORY. PLEASE VISIT OUR STORES WEB PAGE TO PERUSE OUR VAST REPLACEMENT PART INVENTORY OF THOUSANDS OF PARTS FOR YOUR DECKS COSMETIC , MECHANICAL AND ELECTRICAL COMPONENT REPAIR NEEDS
WHILE YOU ARE THERE PLEASE CHECK OUT OUR EVER GROWING DECK ACCESSORY PRODUCTS AND MANUALS
IF YOU DON'T SEE WHAT YOU NEED PLEASE EMAIL US YOUR REQUEST. 80% OF THE TIME WE HAVE IT! WE ARE DILIGENTLY WORKING TO MAKE THAT 100% IF THE TIME.
OUR STORES PURPOSE IS EXCLUSIVELY SET UP TO SERVICE, REFURBISH AND SELL REPLACEMENT PARTS FOR MOST OF THE VINTAGE OPEN REEL TO REEL DECKS OF THE PROFESSIONAL AND EARLY HOME STEREO VARIETY.
OVER THE YEARS WE OURSELVES KNOW HOW VERY FRUSTRATING IT IS LOOKING FOR AND FINDING REPLACEMENT PARTS FOR THESE WONDERFULLY ENGINEERED UNITS. SO WE HAVE DEDICATED OUR SELVES TO BE A SOURCE FOR PEOPLE AND REPAIR FACILITIES LIKE OURSELVES THAT WANT A ONE STOP, CALL, EMAIL, OR WEB PAGE FOR YOUR REEL TO REEL DECK PARTS AND ACCESSORIES NEEDS REASONABLY PRICED.
OUR STORE IS GOING INTO IT'S THIRD YEAR AND DAILY WE ARE INVENTORYING OUR PRESENT STOCK FOR OUR DATA BANK THAT IS MADE AVAILABLE ON OUR WEB SITE ..
PLUS OUR STOCK IS GROWING DAILY TOO.
OVERSEAS BIDDERS!
CONTACT US
 |
|
| |
|
Customer Service Department
|
Store Hours: Monday - Friday |
10:00 AM - 6:00 PM MT |
|
Phone Hours: Monday - Friday |
Noon - 8:00 PM MT |
|
Saturday - Sunday |
Closed |
Vintage Reel to Reel Sales - Repair & Restoration
TEAC * TASCAM * PIONEER * SONY
AKAI * TANDBERG * UHER * REVOX |
* Full Restoration & Service *
Replacement Parts & Manuals |
|
|
|
|
|
|
|
THE ONLY STORE OF ITS KIND DEDICATED SOLEY TO VINTAGE REEL TO REEL SALES, REPAIR AND RESTORATION |
If you have any questions feel free to contact us by phone or email. |
Contact Phone Numbers
|
BIG TIMBER STORE |
406 - 632 - 4114 |
|
OUR TOLL FREE NUMBER |
COMING SOON |
Email
| |
RETURN POLICY
|
|
| |
|
Product Condition: Products must be returned in EXACT condition as shipped from THE REEL PRO SOUND GUYS . Boxes, packing materials, wrappers, cartons, instruction manuals, warranty cards and products must be in their ORIGINAL condition without markings, tape, folds or defacing. Products returned in other than EXACT shipped condition will be subject to a 15% minimum restocking fee. Products returned in damaged or unacceptable condition will be returned to the customer without exchange. Condition will be assessed at the discretion of THE REEL PRO SOUND GUYS .
Packing and Shipping: Pack all items in a sturdy shipping carton (not just the manufacturer's carton). Include a copy of your invoice in the carton. Please keep the original invoice.
International Customers can email us to get a RMA # (Return Authorization Number) while US & Canada Residents can call us at our Toll Free #. Print the RMA# on the shipping carton. Packages without a visible RMA# will not be accepted. Customer is responsible for cost of return shipping. Use the most convenient means of shipping. Insurance is recommended.
Replacements: For products returned in accordance with this policy, you should receive replacement or FULL refund of your Final Auction Price within 14 Business days from the date we receive the merchandise.
| |
|
AUCTION TERMS
|
|
| |
- * We will contact the winning bidders via e-mail within 24 hours after the auction has ended. Winning bidders must confirm their order within 3 business days after notification.
-
- * Payment must be received within 10 business days after order is confirmed. Please contact us immediately if you need special arrangements.
-
- * Once payment is received, all orders will be shipped out within 2-3 business days.
-
- *** Do Not Bid If You Are Not Planning To Pay!
-
- * Items paid thru Paypal can only be shipped to the Confirmed Address. No exceptions to this rule. For International orders, please email us for more payment methods .
-
-
-
- * For Sales Support (1-406-632-4114), Hours of Operation: Monday to Friday 10 AM - 8PM MT. We are closed Saturday and Sunday.
-
- * For Customer Support (1-406-632-4114), Hours of Operation: Monday to Friday 10 AM - 8PM MT
-
- * There will be no Sales Tax in all of the States due to our Beautiful State of MONTANA having NO SALES TAX. Good for us and GREAT for our Customers!
-
- * We are not responsible for any Typographical errors.
-
- Please be aware that all countries have different procedures and/or fees for incoming packages. THE REEL PRO SOUND GUYS are not responsible for and does not have this information available and we can not estimate these charges. Please check with the proper local authorities before placing your bid.
-
- * For Refused Packages, Customers will be responsible for the following: Shipping of the Item, Payment for Custom or Duty Taxes (if applicable, usually to International Countries including Canada), and a 25% Restocking Fee will be applied.
-
- * Upon bidding on any of our eBay auctions, you are binding to our contract and must follow each of every rule or policy that THE REEL PRO SOUND GUYS - Auctions have.
| | |
Shipping & Handling
|  | US Shipping |
$12.10 USPS Priority Mail®
|  | International Shipping |
$24.75 USPS Priority Mail Intl