SATCO SUPPLY

28-275 14" Bandsaw 3/4 H.P. with Open Stand

DELTA Model 28-275
14" Band Saw with 3/4 HP Motor and Open Stand

Includes 28-203 basic machine with open steel stand, 3/4 HP, 115V, 60 Hz., 1725 rpm, single phase, capacitor start motor, 8' cord and 115V grounding type plug; remote control on-off toggle switch and cord connected to motor, chip chute; wheel, blade and belt guards; arbor & motor pulleys and V-belt; blade guides, 28-034 wood-cutting blade, 201 Lbs..

--------------------------------------------------------------------------------
FEATURES:

New Wheel Guards. Steel, hinged wheel guards open instantly and wide for fast, easy saw blade changes.

Smooth Running Wheels. Sturdy die-cast aluminum wheels are precision balanced with rims fully machined concentric with the shaft hole, for smooth running. Recess in rim eliminates use of messy cement-makes tire changing easy.

Special Table Stop. Table tilts full 45 deg. to the right. Adjustable positive stop assures accurate resetting to level position. Stop can be removed for 10 deg. left tilt.

Precision Lover Blade Guides. Lower blade guides have safe, accurate, remote control micrometer adjustment. Lower guides support blade to within 3/4" of table work surface-accurate cutting.

Superior Upper Blade Guide Construction. Upper guide has separate, safe, remote control micrometer adjustments for ball bearing blade support and blade guide blocks. Guides and blade supports adjust independently.

Exact Tension Blade Scale. Direct reading scale on blade tension adjustment shows correct tension for different blade widths. Scale readings are not affected by variable blade lengths.

Exclusive Delta 24-Volt Safety Control System. 14" Band Saws offer a low 24 volts at the push button station for extra operator safety. Magnetic motor control system, mounted in dust-tight enclosure. Provides on-off control, low-voltage control and no voltage protection. Switch cover and buttons are made of non-conductive material for safety.

Specially Designed Table. Side take-out slot for blade permits use of solid front trunnion (not split for blade removal) located directly under work load. Rip fence guide rails need not be removed when changing

blades.
Double-Sealed, Lubricated-For Life Ball Bearings for upper and lower wheels and blade supports and all shafts of back gear unit insure many years of trouble-free performance.

Upper and Lower Wheels are completely guarded. All portions of blade are enclosed and guarded except portion actually cutting material.

Rugged 14" x 14" Table has a 3/8" x 3/4" miter gage groove. Machined for rip fence. Widely spaced double trunnions and heavy ribbing provide rigid support for work.

Guides are finest type ever offered. Each adjusts independently of the other, also adjusts with micrometer accuracy. Guide pins can be set to blade teeth without disturbing the setting of the blade supports; blade supports can be set without altering adjustment of guide pins. Ball bearing blade supports are reversible and double-sealed.

Aluminum Wheels are carefully balanced for true running, also rimmed for proper mounting of tire.

New Chip Chute directs sawdust and chips down and away from lower wheel and housing...may be easily connected to a central exhaust system.

New Style Blade Guide Bar has V-groove design for positive locking of blade guide at desired setting.

--------------------------------------------------------------------------------
CAPACITIES :

Frame to blade - 13-3/4" (349 mm)
Under guide and wheel - 6-1/4" (159 mm)
Under guide and wheel (w/28-984 height attachment) - 12-1/4" (311 mm)
Speed - 3000 SF/M (914 M/Min.)
--------------------------------------------------------------------------------
TABLE :

Size - 14" x 14" (356 x 356 mm)
Groove - 3/8" (10 mm) deep by 3/4" (19 mm) wide
Tilt - to right 45 deg. ; to left 10 deg.
Height from floor - 42-3/4" (1089 mm)
--------------------------------------------------------------------------------
BLADE :

Width - 3/4" (19 mm) maximum
Length - Maximum 94" (2388 mm); Minimum 91-1/2" (2324 mm); Standard 93-1/2" (2375 mm)
Length (w/28-984 height attachment) - Maximum 106" (2692 mm); Minimum 103-1/2" (2629 mm); Standard 105" (2667 mm)
--------------------------------------------------------------------------------
OVERALL DIMENSIONS :

Height - 65-1/2" (1664 mm)
Width on open stand - 31" (787 mm)
Width on enclosed stand - 25
Front to rear - 17-1/2" (445 mm)
--------------------------------------------------------------------------------
WEIGHT :

Weight - 201 lbs (91 kg)

This item is available for pickup from our Melrose Park, IL warehouse. We can also quote freight charges if you wish to have it delivered. Ships out of zip 60160.

Factory list price on this machine is $750.00

Forms of payment
Our preferred form of payment is Paypal. To make ONLINE credit card payments, you will need to do so through Paypal. Direct credit card payments accepted by phone.

INTERNATIONAL SHIPMENTS
Satco Supply is able to ship most items internationally via the Postal Service. Our preferred method is Priority Mail Inernational. This method allows for tracking the movement of packages within the US and at least through customs outside the US. Insurance is included with the Priority Mail shipment up to certain limitations that vary with package weight. On request, we can ship smaller packages via First Class Mail. Please note, however, that this method can not be tracked, and any insurance is optional. If buyer chooses First Class Mail, buyer assumes FULL responsibility for undelivered shipments. No replacements and no refunds will be provided.